Help the people of Ukraine.
- VPC - Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Available with Sync Input/Output
- Low Profile
- Alternate connection ports
- : We usually have a majority of these items in stock.
Please call or contact us for availability. - SKU: RHP-BOS-VPC-TTL-IF
RHP-BOS-VPC-TTL-IF
Video Power Communication (VPC) Transistor-Transistor Logic Interface Module
Power Protection
With the intelligent polarity sensing protection, power can be provided via the USB connection or DC Voltage using the provided 6-Pin Video/Power cable or the 7-Pin Pico Blade cable.
3 Video Output Options
Video can be viewed through either the supplied JST to USB/Video cable, JST to Bare End Lead cable or 7-Pin Pico Blade to Bare End Lead cable.
Sync Ready*
Either video output can be changed to provide Sync Input/Output, via a jumper on the back of the RHP-VPC-TTL Board.
Control is maintained over USB or 3.3V TTL signals. This makes TTL Support available for any project integration.
*Please Note: External Sync is disabled on Boson <9 Hz Cameras.
The use of external sync on these cameras is not supported because pulses cannot be correlated to a specific output frame because of the way the reduced frame rate video is created. If attempted, the camera will reject commands to begin external sync mode.
This kit includes:
- 6-PIN JST to USB/RCA Video cable (1)
- 6-PIN JST to Bare End Leads (1)
- 7-PIN PICO Blade to Bare End Leads (1)
- M1.6 6mm Screws (4)
- M1.6 10mm Screws (4)
- Rear Cover for VPC-TTL Board (1)
- Allen Key (1)
- RHP VPC-TTL-IF Board (1)
- Quick Start Guide (1)
| Power Requirements: | 5 Volts DC - 26 Volts DC |
| Power Dissipated: | Avg. 0.84W - Max. 2W |
| Dimensions: | 21mm x 21mm |
| Weight: | 3 grams |
| Control: | USB 2.0 and/or 3.3V TTL (1.8V Logic Available) |
| Video Output: | NTSC 30Hz / PAL 25Hz |
| Sync Output: (if configured) | Master/Slave |
| INFORMATION | |
| Specifications | |
| Overview | |
|---|---|
| Input Voltage | 5-26VDC - Reverse Polarity Protected |
| Power Dissipation | <0.1W (Camera Not Included), 3.5W Max With Camera, 6W Total Fused |
| Video Channels | 2 Analog NTSC/PAL Switchable Outputs, USB Digital Video |
| Control Channels | USB 2.0 (Video + Control) |
| GPIO Channels | Sync Output Available - Call for details |
| Interface Connector | 6-Pin JST SHR-06V-S-B |
| Size | 21 x 21 x 1.6mm (w/o Connector) 21 x 21 x 6mm (w/Connector) |
| Weight | 2.6g without camera |
| Mounting Holes | Four M1.6 Holes |
| Operating Temp. Range | -40°C to 80°C |
| Storage Temp Range | -50°C to 105°C |
| Operational Altitude | 12km (max altitude of a commercial airliner or airborne platform) |
| What's In The Box |
|
